Carlisle EPDM Pressure-Sensitive Cured Cover Strip

Carlisle EPDM Pressure-Sensitive Cured Cover Strip

Carlisle EPDM Pressure-Sensitive Cured Cover Strip is a nominal 60-mil-thick, cured EPDM membrane with a nominal 28-mil-thick, fully cured, synthetic rubber pressure-sensitive adhesive. PS Cured Cover Strip is ideal for stripping in seams and metal edgings, sealing end laps of FleeceBACK® systems or simply making repairs to cut membrane. PS Cured Cover Strip must be used in conjunction with Carlisle HP-250 or Low-VOC Primer.

Features and Benefits

• Available in 6″, 9″ and 12″ rolls
• As tough as the field membrane
• Fully cured state enables it to handle expansion and contraction loads without weakening
• Resists tearing, flex cracking and abrasion caused by temperature extremes, sunlight, precipitation and all forms of normal weathering

Specifications

• Sizes: 6″ x 100′, 9″ x 100′ and 12″ x 50′
• Base Membrane: EPDM
• Adhesive: Synthetic Rubber
• 100% Solids
• Tensile Strength: 1650 psi (11.3 Mpa) minimum
• Elongation: 1480% minimum
• Tear Resistance: 150 bls/in (35 kN/m)
• Brittleness Temp: -67°F (-55°C)
• Nominal Thickness: 88 mils (2.24 mm)
• Shelf Life: 1 year

Downloads

• Product Data Sheet

To view other EPDM accessories we offer, please click ‘here’. If you do not see what you are looking for or would like additional information on this product, please feel free to call us at 1 (800) 267-2308 or email us at internetsales@crssupply.com.